鲜花( 6) 鸡蛋( 0)
|
ASTM Volume 04.11 目录
Building Constructions
Standards and Related Materials Contained in this Volume:
E72-98 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
E73-83(1996)e1 Standard Practice for Static Load Testing of Truss Assemblies
E154-99 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
E196-95 Standard Practice for Gravity Load Testing of Floors and Flat Roofs
E241-00 Standard Guide for Limiting Water-Induced Damage to Buildings
E283-91 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E330-97e1 Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
E331-96 Standard Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
E405-89(1996)e1 Standard Test Methods for Wear Testing Rotary Operators for Windows
E455-98 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
E488-96 Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements
E489-92(1997) Standard Test Method for Tensile Strength Properties of Metal Connector Plates
E529-94(1998)e1 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
E546-88(1999)e1 Standard Test Method for Frost Point of Sealed Insulating Glass Units
E547-96 Standard Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Cyclic Static Air Pressure Differential
E564-95 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
E575-99 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
E576-88(1999)e1 Standard Test Method for Frost Point of Sealed Insulating Glass Units in the Vertical Position
E577-85(1999) Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems
E605-93(1996) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E621-94(1999)e1 Standard Practice for the Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380)
E631-93a(1998) Standard Terminology of Building Constructions
E661-88(1997) Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
E695-79(1997)e1 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
E713-88(1999)e1 Standard Guide for Selection of Scales for Metric Building Drawings
E736-00 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
E741-95 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
E754-80(2000)e1 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
E759-92(1996) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
E760-92(1996)e1 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
E761-92 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
E767-96 Standard Test Method for Shear Strength Properties of Metal Connector Plates
E773-97 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
E774-97 Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units
E779-99 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
E783-93 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
E833-98a Standard Terminology of Building Economics
E835/E835M-93(1999) Standard Guide for Modular Coordination of Clay and Concrete Masonry Units
E859-93 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
E864-98 Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels
E865-99e1 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
E866-96 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E874-98 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E894-88(1998) Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
E907-96 Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
E917-99 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
E935-00e1 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
E936-98 Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
E937-93 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E964-93(1998)e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
E985-00e1 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
E987-88(1994)e1 Standard Test Methods for Deglazing Force of Fenestration Products
E990-98 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels
E997-84(1992)e1 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
E998-84(1999) Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
E1017-88(1994) Standard Specification for Generic Performance Requirements for Exterior Residential Window Assemblies
E1057-99 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
E1074-93(1998)e1 Standard Practice for Measuring Net Benefits for Investments in Buildings and Building Systems
E1091-98 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
E1105-96 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Curtain Walls, and Doors by Uniform or Cyclic Static Air Pressure Difference
E1121-98 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
E1155M-96 Standard Test Method for Determining FF
E1155-96 Standard Test Method for Determining FF
E1185-93(1998)e1 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
E1186-98 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Retarder Systems
E1190-95 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
E1233-00 Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Cyclic Static Air Pressure Differential
E1258-88(1998) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
E1300-00 Standard Practice for Determining Load Resistance of Glass in Buildings
E1307-00 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
E1334-95(1999) Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
E1368-00 Standard Practice for Visual Inspection of Asbestos Abatement Projects
E1369-98 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
E1399-97 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
E1410-91(1997)e1 Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
E1423-99 Standard Practice for Determining the Steady State Thermal Transmittance of Fenestration Systems
E1424-91(2000) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1425-91(1999) Standard Practice for Determining the Acoustical Performance of Exterior Windows and Doors
E1464-92(1999) Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
E1465-92 Standard Guide for Radon Control Options for the Design and Construction of New Low Rise Residential Buildings
E1480-92(1998)e1 Standard Terminology of Facility Management (Building-Related)
E1481-00a Standard Terminology of Railing Systems and Rails for Buildings
E1486M-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
E1486-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
E1494-92(1996) Standard Practice for Encapsulants for Spray-or-Trowel-Applied Friable Asbestos-Containing Building Materials
E1509-95e1 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
E1512-93 Standard Test Methods for Testing Bond Performance of Adhesive-Bonded Anchors
E1513-93(1996) Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E1514-98 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
E1554-94 Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
E1555-98 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
E1556-98 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
E1557-97e1 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
E1592-98 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
E1602-94 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
E1605-95a Standard Terminology Relating to Abatement of Hazards from Lead-Based Paint in Buildings and Related Structures
E1612-94(2000) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
E1613-99 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
E1637-98 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
E1643-98 Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
E1644-98 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1645-94 Standard Practice for the Preparation of Dried Paint Samples for Subsequent Lead Analysis by Atomic Sprectrometry
E1646-95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
E1660-95a(1999) Standard Classification for Serviceability of an Office Facility for Support for Office Work
E1661-95a(1999) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
E1662-95a(1999) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
E1663-95a(1999) Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
E1664-95a(1999) Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
E1665-95a(1999) Standard Classification for Serviceability of an Office Facility for Facility Protection
E1666-95a(1999) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
E1667-95a(1999) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
E1668-95a(1999) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
E1669-95a(1999) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
E1670-95a(1999) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
E1671-95a(1999) Standard Classification for Serviceability of an Office Facility for Cleanliness
E1677-95(2000) Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
E1679-95(1999) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
E1680-95 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
E1692-95a(1999) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
E1693-95(1999) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
E1694-95a(1999) Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
E1699-95 Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems 1,2
E1700-95(1999) Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope 1,2
E1701-95(1999) Standard Classification for Serviceability of an Office Facility for Manageability 1,2
E1726-95 Standard Practice for Sample Digestion of Soils for the Determination of Lead by Atomic Spectrometry
E1727-99 Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
E1728-99 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
E1729-99 Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
E1730-99 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
E1741-00 Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry
E1745-97 Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
E1748-95 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
E1749-00 Standard Terminology Relating to Rigid Wall Relocatable Shelters
E1753-95 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
E1765-98 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
E1773-00 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
E1775-96 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
E1783-96(2000) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
E1792-96a Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
E1793-96 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
E1794-96 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
E1795-00 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1796-97 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1797-00 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1800-96 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
E1801-96 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
E1803-99 Standard Test Methods for Determining Structural Capacities of Insulated Panels
E1804-96 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
E1807-96 Standard Terminology Pertaining to Metal Connector Plates
E1825-96 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
E1826-96 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
E1827-96 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
E1828-96 Standard Guide for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint
E1836-98 Standard Classification for Building Floor Area Measurements for Facility Management
E1851-97 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
E1857-97 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
E1864-97 Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures
E1886-97 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
E1887-97 Standard Test Method for Fog Determination
E1907-97 Standard Practices for Determining Moisture-Related Acceptability of Concrete Floors to Receive Moisture-Sensitive Finishes
E1908-97 Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb)
E1918-97 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
E1925-99 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
E1946-98 Standard Practice for Measuring Cost Risk of Buildings and Building Systems
E1973-99 Standard Practice for Collection of Surface Dust by Air Sampling Pump Vacuum Technique for Subsequent Lead Determination
E1974-98 Standard Specification for Shelter, Electrical, Equipment S-250/G
E1975-98 Standard Specification for Shelter, Electrical, Equipment S-280/G
E1976-98 Standard Specification for Shelter, Tactical, Nonexpandable
E1977-98 Standard Specification for Shelter, Tactical, Expandable, One-Side
E1978-98 Standard Specification for Shelter, Tactical, Expandable, Two-Side
E1979-98 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
E1980-98 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
E1993-98 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
E1996-99 Standard Specification for Performance of Exterior Windows, Glazed Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes
E1998-99 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
E2004-99 Standard Test Method for Facing Cleavage of Sandwich Panels
E2013-99 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
E2025-99 Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies
E2026-99 Standard Guide for the Estimation of Building Damageability in Earthquakes
E2029-99 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct using Tracer Gas Dilution
E2051-99 Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis
E2052-99 Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities
E2068-00 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
E2083-00 Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit
E2094-00 Standard Practice for Evaluating the Service Life of Chromogenic Glazings
E2098-00 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
E2099-00 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
F588-97 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
F842-97 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
PS116-99 Provisional Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
PS72-98 Standard Provisional Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
PS95-98 Standard Provisional Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings using Field-Portable X-Ray Fluorescence (XRF) Devices |
|