设为首页收藏本站--- 驰名中外的国际土木工程技术交流平台!

东南西北人

 找回密码
 注册

QQ登录

只需一步,快速开始

东南西北人 门户 职业生涯 查看内容
AUD$1=500 Gold Coin
本站帖子精华之精华汇总 Best of the Best英语口语、听力、翻译、考试学习经验交流与探讨
1000多土木工程类行业软件、计算表格和计算工具免费下载东南西北人网站QQ精英群 QQ189615688100多个专业词典大汇总
如何获取积分和金币?支付宝充值银行汇款充值

英国注册工程师考试的情况

2011-1-7 21:12| 发布者: ljmtidilgw| 查看: 263| 评论: 19

摘要: The examination is intended to be a test of the candidate's ability to develop detailed solutions for challenging structural problems. Candidates will need to demonstrate their understanding of stru ...
The examination is intended to be a test of the candidate's ability to develop detailed
solutions for challenging structural problems. Candidates will need to demonstrate their
understanding of structural engineering and be able to produce two alternative solutions
that are robust, stable and buildable. They will also have to demonstrate their knowledge and
experience through sketches, diagrams, calculations and descriptions of their solutions.
The examination is highly regarded throughout the world and provides a challenging test for the
candidate. However, those who have a good all-round experience in structural engineering and
who have thoroughly prepared should be able to pass the examination at the first attempt.
At the time of writing (2006) the candidate is expected to answer one question out of eight.
The type of material expected to be used in the solution or the type of structure in the eight
questions follows a regular pattern
1. Steel building 5. Concrete building
2. Steel building 6. General structure
3. Bridge 7. Offshore structure
4. Concrete building 8. Structural dynamics
Knowing that a solution to a particular question is expected to use a certain material may lead
the candidate to consider solutions in that material only. However, a solution in another material
may be equally applicable and indeed there have been occasions in the past where an alternative
material has been more appropriate. The candidate should therefore have an open mind; there is
no single solution to any of the questions.

本文内容由 wangjianping 提供

发表评论

最新评论

引用 wangjianping 2010-5-26 12:20
Timing
The examination lasts for seven hours, plus half an hour for lunch. There are 100 marks available
and the candidates should plan their time so that all sections are completed.There is no substitute
for experience, and sitting a mock examination will enable the candidate to appreciate what can
be achieved in the seven hours available. If the time available for each section is allocated in
proportion to the marks available, the following timetable can be followed:
09:30 section la (40 marks)
12:20 section lb (10 marks)
13:00 Lunch
13:30 section 2c (20 marks)
14:55 section 2d (20 marks)
16:20 section 2e (10 marks)
17:00 Finish
The largest proportion of the marks is for section 1 a and the candidate may want to produce an
individual timetable for this section
引用 wangjianping 2010-5-26 12:21
Further information
There is plenty of useful information about the examination that is freely available from
the Institution of Structural Engineer's website131. Candidates are advised to download this
information and study it.
引用 wangjianping 2010-5-26 12:23
Viable structural solutions
Candidates are required to prepare a design appraisal of two distinct and viable solutions for
the brief. It is important that two solutions are presented; offering only one solution is likely
to result in a failure. Both solutions should be prepared to the same level of detail. Candidates
should demonstrate to the examiner the ability to conceive and present distinct options for
the proposed structures.
They should indicate the functional framing, load transfer and stability of the schemes. The
question asks for the functional framing before the load transfer diagram because this is the
necessary and logical sequence. The load path must follow through the framing. Similarly,
the means of stabilising the frame can be addressed only after the load paths have been
identified.
In developing solutions the candidate should consider the following issues; more detail is given
throughout this section.
Functional framing
Load transfer
Stability
Safety
Economy
Buildability
Robustness
Durability
Site constraints
Speed of construction
Aesthetics
Acoustics
Footfall-induced vibration
Thermal mass
Sustainability
Building movements
Fire resistance
引用 wangjianping 2010-5-26 12:25
The letter
Section 1b asks candidates to write a letter to their client in response to a change to the
scheme. This is a good test of the ability to communicate effectively to a non-technical
reader. The examiners will also be assessing the candidate's appreciation of the structural
implications of the changes. The examiner's reports regularly highlight that the purpose of
the letter is not to seek additional design fees, i.e. the purpose of the letter is to deal with
the structural aspects of the request not the business aspect.
It should be laid out as a letter and include sketches if necessary, and a recommended course
of action. Candidates should NOT sign it, as the scripts should remain anonymous. Include any
calculations carried out in preparing the letter in the script (see Figure 2.16).
Candidates should therefore give an explanation of the structural problem, together with a
solution to that problem. It should outline clearly and fully how the client's request might be
achieved, in terms of:
Cost
Programme
Function
Safety
Aesthetics
The ability to write appropriate letters can only come through practical experience. Those
candidates who have experience of writing similar letters will be able to undertake this task
with confidence. Those who lack experience will find it a challenge and should ensure they
prepare adequately for this section of the examination. It is often a good idea to read and
understand what is required for the letter before tackling Section la of the examination. If
the solution required in the letter appears trivial then it may well be that the candidate has
overlooked an important part of the question.
引用 fb1963 2010-6-8 16:31
本帖最后由 fb1963 于 2010-6-8 16:34 编辑

It is seemly very faraway me, but i study the nothern america specifications now, it is a hard work and meaning task. though i am a beginner , i think i will win!
引用 zl6078 2010-6-15 20:24
I think it is very difficult to pass it, especially for me.
The biggest stone is Englishe.
引用 revista 2010-6-24 15:42
it is a very comprehensive test. If in our country adopt this kind of test. The people who pass it will have real engineering idea.
引用 denime 2010-7-6 17:22
not so difficult lar
引用 zym327 2010-8-7 08:03
现在都这么有想法,考国外的注册!~
引用 Pgain 2010-8-7 20:28
It's so difficult to me.
引用 davidlau1976 2010-12-3 13:19
在那里可以查到更详细的资料啊,
引用 davidlau1976 2010-12-3 13:20
比如报名的程序,资格,费用等
引用 hanzhimao 2011-1-10 13:52
有没有考过的人啊,介绍下经验
引用 ljmtidilgw 2011-1-12 19:59
good stuff
引用 longmier 2012-12-8 00:11
好   谢谢楼主
引用 northwindgod 2013-3-3 22:00
很想了解,关注下。
引用 liuhuoyuan 2013-3-12 15:29
有没有考过的,介绍一下经验啊!
引用 wxlin 2013-10-5 21:16
目前国内好像都是推荐的
引用 hd883 2013-10-6 06:01
Wow...

查看全部评论(19)

QQ|关于我们|QQ即时充值|站点统计|手机版|小黑屋|百宝箱|留言|咨询|微信订阅|QQ189615688|东南西北人

GMT+8, 2017-7-25 22:47 , Processed in 0.068622 second(s), 28 queries , Xcache On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

返回顶部